Search results

  1. OneLapper

    OneLapper Data Cable Update

    Hello I have several orders for cables but will not be able to get them shipped out for several weeks. I sincerely apologize for this delay, as I know some of you need them badly. I have a business project and I've been working out of state for some time now already. Thank you Mark
  2. OneLapper

    Alta Motor Bearings needed

    This might be a long shot, but would anyone know the bearing part numbers for the Alta motors? I'm working on a MXR and the motor bearings are ruined from dirt and water getting past the counter-shaft seal. Thanks
  3. OneLapper

    PSA: What to ask for when buying an Alta

    Hey! I want to put this out there. It's REALLY important that a buyer asks the seller to provide screenshots of the battery with MT at 100%, 50% and around 25% state of charge. There are C36 bikes out there that are being sold to buyers after the codes have been cleared and the rest of the...
  4. OneLapper

    Any donor bikes out there?

    I thought I would throw this out there. I'm still collecting parts and tools to fix the battery modules, but in the mean time are there any "dead" Altas out there? I thought there would be donor bikes available by now. Battery parts are scarce now. I know all of the Altas I have worked on...
  5. OneLapper

    Task Racing battery pack storage.....

    Several of us AOF memebers purchased LED off road lights from @MrTaskRacing . The season is upon us to put these amazing light away for the winter. I realized that I had no idea what amount of charge I had in my helmet light and the light bar! I read through the literature I got, I can't say...
  6. OneLapper

    2018 EX firmware update, then Code 35 & 36

    My Alta riding buddy, @Duncan, brought his 2018 EX over to my shop yesterday. We had planned on updating the FW hoping it would address a rapid charger fault issue. Duncan and I both bought our bikes from the same dealer, a day apart. His bike never went back to the dealer for any updates...
  7. OneLapper

    Rock Guard, old vs new and the problem....

    I'm in the process of freshening up my bike. I installed a new rock guard on the subframe and noticed it didn't fit well. When the wheel is rolled backwards, the rock guard/flap hangs up on the tire. A closer look identified that a production change happened and the rock guards available...
  8. OneLapper

    J Day Offroad, last GP of the season at Southwick.......

    The day started off at a brisk 28 degrees, frost covering the ground. Every stick of wood used to make the Extreme Section was as slick as ice, hard to walk on it without wiping out. For the season finale, the extreme section sported a jersey barrier! Thankfully, the organizers provided a go...
  9. OneLapper

    CANCELED......2020 NE 24hr Challenge! July 18th & 19st 2020 Team AltaOwnersForum.com

    Canceled for 2020 due to the pandemic. Registrations will carry over to the 2021 race or you can get a refund. Who's up for the 2020 NE 24hr Challenge? This years event is July 18 & 19th, 2020. This time we know what we're doing. We know what to bring. We know what not to bring...
  10. OneLapper

    Can someone with MT......

    Do we have anyone here in the Durham NC area that is willing/able to check out a MXR for sale at a dealer? The potential buyer wants to make sure the bike doesn't have any Code 36 issues. The dealer doesn't have the right version of MT to check for this. The VIN is 419, it's a 2018 MRX demo...
  11. OneLapper

    Map switch..... where to buy?

    MotoSport listed the Trail Tech 8500-RS for sale. I've ordered from them twice, both times they have cancelled my orders. I see Trail Tech does not list the part number on their website any longer. Does any have a suggestion for an online retailer?
  12. OneLapper

    Honda EU2200 issue..

    EDIT: Condition described below is cause by the generator being "Neutral Floating" which by nature does not work with GFCI plugs, such as installed on the Alta chargers. The fix is to use a jumper in the other electrical outlet which connects the ground pin to the neutral pin, thus "bonding"...
  13. OneLapper

    J Day Offroad GP and Hare Scramble at Hemond's, Minot ME

    Coming right off the North East 24 Hour Challenge, we dropped the bus and car trailer for the Dodge pickup and Airstream trailer to head to Maine for the weekend! The bus is a blast to drive, but it's a four speed non-synchro transmission with a super stiff double disc clutch. It's awful in...
  14. OneLapper

    Alta hub spacers, any interest?

    Hello Alta friends and family! Ok, so some time ago I needed to replace the front wheel bearings on my Alta. I found the spacers were grooved out, and subsequently I found out that Warp 9 will not sell them! I drafted up sketches, priced the material, sent it all off to be quoted by a CNC...
  15. OneLapper

    Want to buy Alta coolant hoses

    Does anyone have a set of Alta silicone coolant hoses that they want to sell? Shoot me a PM if you do. Thanks OneLapper
  16. OneLapper

    Did anyone place a parts order with Alta, not get the parts they ordered AND did not get refunded?

    When Alta "reopened" for a month or two and took orders to fulfill dealer and customer orders, how many owners placed an order for parts and never got the parts they ordered? AND, how many of those that DID NOT get the parts they ordered DID NOT get their money refunded? If you're not...
  17. OneLapper

    MXR Negative Contact Relay Failure........

    A fellow New Englander dropped off his '18 MXR for me to look at. Problem: Bike does not go into "Drive" when start button is pressed. Code: Bike Displays "Battery Negative Contactor Fail" on display History: This may be the very last Code 36 bike that was fixed under warranty by Alta...
  18. OneLapper

    Sold Mobius X8 Knee Braces Large

    For Sale $525, or best offer, plus shipping. Now shipping INCLUDED! Brand new, never worn Mobius X8 knee braces, Storm Grey, size large. Evidently my legs are medium per Mobius
  19. OneLapper

    N2Dirt and Dal Soggio Sphere Upgrade

    Last night I tore the Alta down in order to pull the forks and shock. I sent them off to Brian at N2Dirt to install the Dal Soggio Spheres, respring and revalve the forks, then install a bladder kit (and revalve) the shock. I'll keep track of the upgrade, adjustments, thoughts, issues...
  20. OneLapper

    Dal Soggio for 4CS?

    So I nearly died for the last time at this weekends Jday GP at Southwick. My pace has gotten faster and I'm now experiencing/noticing the short comings of the 4CS forks. I'm a solid Novice on any motocross track and can usually keep pace in the woods (except when riding with @Duncan who appears...
Top Bottom