Thinking about making the plastics for alta

TCMB371

The Silent Assassin
Forum's Sponsor
Likes
1,737
Location
Temecula, CA
@metallic88 i really appreciate you scanning the parts. Do you think you can scan the rear fender, subframe, shock mud flap, lower black plastic cover underneath the rear fender, and/or the rear tailight/license plate bracket for EX/EXR's? Or do you have some sort of size restriction on your scanner?
 

metallic88

Well-known member
Likes
171
Location
utah
@metallic88 i really appreciate you scanning the parts. Do you think you can scan the rear fender, subframe, shock mud flap, lower black plastic cover underneath the rear fender, and/or the rear tailight/license plate bracket for EX/EXR's? Or do you have some sort of size restriction on your scanner?
ive been thinking of those(just haven torn it apart), I dont have a ex/exr so i cant do that. but my scanner has no limitations ive scanned whole cars with it and whole dirtbikes.
 

metallic88

Well-known member
Likes
171
Location
utah
@metallic88 i really appreciate you scanning the parts. Do you think you can scan the rear fender, subframe, shock mud flap, lower black plastic cover underneath the rear fender, and/or the rear tailight/license plate bracket for EX/EXR's? Or do you have some sort of size restriction on your scanner?
i tried to upload them but it says their too big.
heres a link to them, theyll need alittle work i didnt want to spend anymore time on them.
asfprts.zip
 

VINSANITY

Well-known member
Likes
209
Location
Texas
I think that 2006 Yamaha YZF shrouds May be the right size / configuration / shape etc.

I attached some pictures - would be willing to purchase a shroud off eBay and send it to you to try.

9E32859A-60F5-4F96-8886-19010E06BDA4.jpeg

E749D071-6458-4D7A-9D64-B782C52692FB.jpeg

9661E84D-20FF-4783-B7BC-F08F8D36056D.jpeg

BC3C5B97-9D8B-4869-965A-6A1A92A883F6.jpeg

56701F2A-AAFA-434A-92B1-603FFA5A281E.png

AA974E06-A8C4-42A3-8807-B00044917FCC.jpeg

BC1286A6-7846-4878-A9E8-ABB412CBEF1D.jpeg
 

metallic88

Well-known member
Likes
171
Location
utah
I think that 2006 Yamaha YZF shrouds May be the right size / configuration / shape etc.

I attached some pictures - would be willing to purchase a shroud off eBay and send it to you to try.
my 2013 kx450 are practically made for the alta with a little cutting. the ktm ones fit pretty good as well i just dont like covering the frame vents so i havent found a way i like it.
 

C5tor

Chief Comedic Instigator
Likes
786
Location
San Ramon, CA
Interesting. I see you routed your LHRB through the frame. Interesting choice. It looks a little more protected that way, and doesn't produce a high-point for air bubbles down by the gearbox like the OEM routing does.
 

metallic88

Well-known member
Likes
171
Location
utah
I highly recommend against it because it gives a chance to the hose to rub against the harnesses.
wouldnt it rub against the coolant lines also, or maybe its ran lower?
(idk cause i dont have a LHRB, but theres not much room in that frame especially if you want to replace the 9v battery)
 

Similar threads