Stock wheel spacers front


leeo45

Geezer in denial
Anyone have the specs for the wheel spacers, in case we wanted to make our own? ID/OD and width?

The dimensions were posted by @rayivers almost a year ago when we discovered that Warp9 could not provide the front spacers. Here is a link to that post:

Front Axle Spacer Thread

and here is the figure:

mxr-f-axle-spacer-collar-aer-fork-jpg.2486
 

VINSANITY

Well-known member
Location
Texas
I am trying to install a front brake caliper guard and to do that I need to machine a custom front wheel spacer - basically need to have a slightly smaller diameter on outboard side nearest to the disc.

Can anybody do this custom machine job.

Thanks
 

Philip

Administrator
Staff member
Location
Ann Arbor, MI
I am trying to install a front brake caliper guard and to do that I need to machine a custom front wheel spacer - basically need to have a slightly smaller diameter on outboard side nearest to the disc.

Can anybody do this custom machine job.

Thanks
If you can modify the stock spacer, you can google any local machine shop and pay them for 30 minutes of their time. This is probably the easiest thing to do.
 

Similar threads

Top Bottom