For Sale Motor for sale.

rayivers

Well-known member
Likes
242
Location
CT, USA
#3
Just fwiw, my spare motor - new in (damaged) Furuno box - has the exact same bend. I've included your last pic with a straight line across the LH side of the motor end plate, I see a very slight upward angle on the RH plate side in addition to the bend (can any ex-Alta folks confirm if this plate should be pancake-flat across its full width?).

Alta Motor Angles.jpg
 

Littlehat

New member
Likes
2
Location
San Diego
#6
I was able to get in contact with the person I bought the motor from and do an exchange for a new motor that wasn't damaged. I will update with some more pictures later. This new motor is still up for sale and could act as a good spare for some one stocking spares for the future.

15665915223277167842941597382904.jpg

15665915911805867209683158860255.jpg
 

Mark911

Well-known member
Likes
467
Location
Corona Ca
#9
That looks like an engineering or development model motor. It's got the thermal winding potting (the OEM motors don't have this). I believe that same motor was referenced here on the AOF sometime back.

I'd be interested in the damaged motor if you can put me in contact with the source.