Missing bushing?


WoodsWeapon

Well-known member
Likes
240
Location
USA
I just removed my rear brake pedal to clean out the toothpaste, add a Fasstco spring, and some cleats to the tip. I have the pedal, steel sleeve with Orings, and the bolt. Is there another bushing that should be inside of the sleeve? In other words, I have an M8 bolt going into a 12mm hole. Other than the countersunk pedal bolt and a mm or two of steel, theres nothing else to keep the pedal from getting pushed at an angle. Seems its gonna wear pretty quick?
 

rayivers

Well-known member
Likes
523
Location
CT, USA
It seems like the CS bolt holds the sleeve hard & flat against the frame boss, and the sleeve/pedal is a nice tight fit (on my bike anyway) which should make for pretty decent wear characteristics as long as there's some grease in there. I was little surprised there was no replaceable pedal bushing (Delrin or whatever), but sometimes those can make for a sloppy pedal feel even when new.
 
Similar threads
Thread starter Title Forum Replies Date
F451 Rear Brake Pedal Pivot Bolt Missing Inner Bushing? Mechanical Repair 14

Similar threads

Top Bottom