Bleeder Valve


privateer703

AOF Addict
Likes
687
Location
Altoona, PA
Anyone know the correct bleeder valve thread size for the 19' MXR forks? I thought these forks were the same as the 15 KTM 250 XC, but the threads are much smaller. Rocky mountain atv wants me to select my bike for selecting the correct bleeder valve, but they don't have alta's in their selection list. I'm pretty sure it's an M8, but it would be nice to know for sure before I buy another set.
 

Bloak

Well-known member
Likes
133
Location
Ontario, Canada
From eBay, item# 182670537825
Motion Pro micro bleeders.
For use on WP AER48 inverted forks with one each M4 x 0.7 and M8 x 1.0 air bleed screws in the fork caps
 

leeo45

Geezer in denial
Likes
576
Location
Lake Hartwell, SC
Buy those instead (the brand, not the specific model) as they are vastly superior to the Motion Pro ones.
STR - Speed Bleed Button

Definitely agree with this recommendation. They don't leak air in or out unless you are pressing the cap. Possibly more expensive, but definitely more reliable and longer lasting than other designs. I have them on my EXR (4mm XPLOR = STR 10-21) and MXR (4mm/8mm AER = STR 10-25).
 
Similar threads

Similar threads

Top Bottom