Search results

  1. Brillie35

    ALTA custom parts - Files for fabricating

    Hey no problem over here. It was never my intention to make a commercial profit. I made them for myself to protect the bottom battery cover. Which is pretty thin plastic. The only thing I wanted to make clear is, that if there is a demand. I would have to make a series to get the price down.
  2. Brillie35

    ALTA custom parts - Files for fabricating

    I did not start making them for other people. If i had to make just 1 set, it would be around 200$ + shipping. I would need to make at least 10 sets to get the price closer to 100$ Thats why i releashed the CAD files, so anyone interested with the right connections can make their own. If there...
  3. Brillie35

    Tesla ATV and Cybertruck

    It seems that the ATV has some kind of clutch on it. Those sidepanels do not look very knee friendly...
  4. Brillie35

    Anybody with KTM Freeride E Please help!

    If KTM brings the freeride e series to America you can be sure the charger will accept your most common power network. I too have a KTM freeride e. After KTM didn't sell very much of them, they went with a 50% price discount over here. It is for sure not a full blown motocross bike. You should...
  5. Brillie35

    Harley-Davidson's LiveWire Has So Far Been A Flop: Report

    I feel the same way about it. If it was a good deal for them they for sure would helped Alta further. Tough decisions for those company's, price to make some sales or price to make some money. If the Alta was double the money i for sure was not interrested anymore. I guess we all should be very...
  6. Brillie35

    “Factory” bar mounts

    I got no problem hooking people up with skidplates or other parts. But shipping from the Netherlands to America would probably be half of what a set costs. And i don't know exactly what the forum's policy on selling stuff is. I am not in it for a commercial point of view. And fabrication could...
  7. Brillie35

    “Factory” bar mounts

    Thanks, didn't want to completely block the airflow around the battery. As the autumn starts over here it gets pretty muddy. So we can put it to the test.
  8. Brillie35

    ALTA custom parts - Files for fabricating

    Skid plate:
  9. Brillie35

    “Factory” bar mounts

    Finished the skid plate. Files are up in the fabrication file thread.
  10. Brillie35

    DIY LHRB that retains the foot brake

    Brake Spring Return Kits I made one myself, but i did read somewhere the KTM/Husky version fits.
  11. Brillie35

    ALTA custom parts - Files for fabricating

    So you can combine the foot brake with a left hand brake lever.
  12. Brillie35

    DIY LHRB that retains the foot brake

    I got it from a dutch motorparts webshop. First i wanted to make one myself. But when i was shopping for a brakeline it came across. When you got air in the system it compresses and you loose the firm feel. And if you only use one finger i think it is just enough to let you think you miss power...
  13. Brillie35

    DIY LHRB that retains the foot brake

    After reading that some had trouble bleeding the system with the extra brake line to the handlebars, I did a extra bleed nipple on top of the rear brake insert. I have no trouble brake sliding with only one finger applied.
  14. Brillie35

    “Factory” bar mounts

    I did take a quick look, but with the space needed for the rear brake pedal, I think it would be better to make seperate plates that mount on the footpeg brackets. Are you looking to protect the hinges against mud? Or the whole footpeg against rocks?
  15. Brillie35

    ALTA custom parts - Files for fabricating

    Alta stand:
  16. Brillie35

    ALTA custom parts - Files for fabricating

    Rear brake insert:
  17. Brillie35

    ALTA custom parts - Files for fabricating

    Bar mounts:
  18. Brillie35

    ALTA custom parts - Files for fabricating

    Me and my brother made some custom Alta parts. Note this thread: “Factory” bar mounts Because I am very grateful for all help and information on this forum, i would like to make the fabrication files available.
  19. Brillie35

    “Factory” bar mounts

    No problem, maybe @Philip could join in on what is the best way to add these files to the forum.
  20. Brillie35

    “Factory” bar mounts

    I would be. But I don't know if its that good of a deal with shipping from the Netherlands. Shipping alone would be around 50€. A rough estimate for the kit would be around 100€. I know exactly when i finished mine. But i would also have no problem giving back to the Alta community by releasing...